Slitting Machine Knife Type

Write By: administratorPublished In: ROOTCreated Date: 2017-10-13Hits:8255Comment:0

Choosing right knife system is very important for the slitting work, below is a brief introduction for reference.

Slitter rewinder machines use three types of slitting methods to cut material: razor bladeshear cut, and score cut. The most appropriate slitting technique to use depends on a variety of factors, such as the type and thickness of the materials being processed. With well over decades of combined manufacturing expertise in Havesino, we've gained valuable insight into the use of slitter rewinder. This article is based on our hands-on experience and explains, on a very basic level, which slitting methods are suitable for various applications.

Razor Cut: Used primarily with light and non-abrasive materials, this method employs a simple razor blade slit in the air or in a grooved roll.

Pros: This is the most economical method, along with having a fast and easy setup.

Cons: This method is not capable of easily cutting through heavy, rigid, or abrasive materials. At high speeds, the razor blade method can also burnish film. If enough heat is generated, it will melt the film, creating a bead that is detrimental to achieving good winding.

Shear Cut: This slitting method uses two rotary knives to produce the same cutting effect as obtained by pushing a pair of opened scissors through a sheet of paper. It is used for slitting heavier gauge material such as thicker film/sheet, paper, foil, and most laminates.

Pros: The benefits of this method include accurate slit widths and close tolerances.

Cons: The setup for this method needs to be extremely precise, and requires achieving an ideal angle at the junction of the blades. 

Also referred to as “crush cut,” the score cut method is the oldest form of cutting and the first employed in slitter rewindermachinery. It involves crushing the material to sever one part from the other by using a dull knife making contact with a hard surface. This method is ideal for slitting pressure-sensitive adhesives, since it creates a “dry,” non-sticky edge.

Pros: Quick setup is a major advantage of this method.

Cons: When the score cut method is used to slit paper material, it creates dust that can accumulate and cause equipment malfunction. Also, if a defect appears when slitting plastic film and sheet, this can create film stretching and deformities (leading to rejects). When used on hard plastic, it may cause cracking.

While this information will help you determine which methods may be best for your application, it’s important to keep in mind that every project has different goals and uses varying machinery, materials, and processes. Please contact the Havesino for more details if any questions. 

Tags:News

Leave A Comment

Captcha