HN1600 Slitter Rewinder for Thermal Film,BOPP,LDPE,PET,OPP,CPP,Foil,Lamination film
HN1600 Duplex Slitter Rewinder is one of our most popular multipurpose slitter for Thermal Film,BOPP,LDPE,PET,OPP,CPP,Hot Stamping Foil,Cold Foil,Labels,Polyester Film, Fabric and so on. It is fully auto tension control slitter, max slitting speed 500m/min, it is a very cost effecitve slitter which worthy your investment.
If you have your own design, please contact us, there will have a professional customer service to communicate with you.
Don't have your files right now?No worries, Check out our art tips for more information.
If over 500pcs, mass production will start until pre-production sample has been approved.
Est. 7 days production
A:12-180um HOT STAMPING FOIL,COLDING FOIL,HOLOGRAPHIC FOILS,METALIZED FOIL and so on
B:12-180um PRIMARY FILM (BOPP,PVC,LDPE,PET,SINGLE SILICON FILM and so on)
C:12-180um LAMINATES (FILM to FILM,FILM TO FOIL,FILM TO PAPER and so on)
D:Non-Woven FABRIC
E:40-80gram PAPER/LABEL/ADHESIVE LABEL
SLITTING WIDTH | 300mm-1600MM |
SLITTING THICKNESS | 12-250UM |
UNWIND DIA | MAX800MM |
UNWIND CORE I.D | SHAFTLESS 3 INCH AND 6 INCH |
REWINDING DIA | MAX 600MM(3 INCH REWIND),MAX 250MM( 1 INCH REWIND) |
REWINDING WIDTH | MINI 30MM |
REWINDING CORE I.D | 3 INCH NORMAL AIR SHAFT EACH 2 PCS |
SLITTING UNIT | SHEAR BLADE+RAZOR BLADE EACH 10 PCS |
MECHANICAL SPEED | MAX450M/MIN |
WORKING SPEED | MAX400M/MIN |
MACHINE FRAME THICKNESS | 40MM |
METER COUNTER | METER COUNTER |
WASTE EDGE UNIT | AIR BLOWER |
POWER SOURCE | 380V,3 PHASE 4 WIRES,50Hz |
PNEUMATIC SOURCE | 0.7MPA |
LASER POSITIONING | 8 PCS |
MACHINE SIZE (REF. ONLY) | 3250mm(not including unloading frame tree)×2550mm×1970mm 4490mm(including the unloading frame tree)×2550mm×1970mm |
FLOOR SPACE(REF.ONLY) | 4500MM*3300MM |
N.W/G.W (REF. ONLY) | 3500/4000 |
1: 2 pcs 3 inch NORMAL AIR SHAFT;
2: 2 MOTORS control up and down rewinding shaft independently and separately, it can realize different size shaft rewind with different outside diameter rolls, easy control;
3: Full width lay- rollers by air control to ensure the finished roll surface keep smooth; Indimediate Roller with Over-winding way of rewinding;
4: Manual laser core position units help to set paper/plastic cores easily and quickly, begin next slit run with very short downtime.
1: Manual finished roll unloading tree to help unload finished rolls conveniently;
1: Razor blade slit + Shear blade slit. Razor and Shear blade system changes by removing the razor blade shaft out and put on the up shear blade shaft. Down blade system do not need to change.
2: Razor blade setting easily setting by wrench losing and fixing, very quick and easy;
3: Shear Blade system: up blade is using self-locking blade, it can easily move and fix by the screw; down blade setting by air shaft system, lose and fix the blade through the air deflating and filling, saves 50% time than the traditional way;
1: Air Brake with load cell close loop system for unwind tension control
2: 3 inch and 6 inch shaftless uwinding system, easily change the jumbo roll
3: Hydraulic lifting system to help the operator loading the jumbo roll max. 1 ton from floor
4: Material splice table, easy change and guarantee edge consistency
5: E+L edge guider
6: Splice tabel to help operator make joint easily when change jumbo roll
1: Copy of Software
2: CE certificate
3: Laser Or Gravity Protection System
Recommended products: