Hot Stamping Foil Slitter HN1300

Standard 1300mm Hot Stamping Foil Slitter and cold foil slitter

Message

$??.00

Have chosen: There are no options selected.

Order After Login

Added To Cart Successfully!

Hot Stamping Foil Slitter HN1300

Hot Stamping Foil Slitter HN1300

Standard 1300mm Hot Stamping Foil Slitter and cold foil slitter

         
PriceShow price after login

If you have your own design, please contact us, there will have a professional customer service to communicate with you.

Don't have your files right now?No worries, Check out our art tips for more information.

If over 500pcs, mass production will start until pre-production sample has been approved.

Est. 7 days production

APPLICATION

 
 
A.
12-180um HOT STAMPING FOIL,COLDING FOIL,HOLOGRAPHIC FOILS,METALIZED FOIL and so on
 
B.
12-180um PRIMARY FILM (BOPP,PVC,LDPE,PET,SINGLE SILICON FILM and so on)
 
C.
12-180um LAMINATES (FILM to FILM,FILM TO FOIL,FILM TO PAPER and so on)
 
D.
Non-Woven FABRIC
 
E.
40-80gram PAPER/LABEL/ADHESIVE LABEL
 
AND OTHER MATERIAL (PlS CHECK WITH THE SALES MANAGER)

BASIC SPECIFICATION

ModelHN1300
SLITTING WIDTH300mm-1300MM
SLITTING THICKNESS12-250UM
UNWIND DIA.MAX800MM OPTIONAL:1000MM
UNWIND CORE I.D.SHAFTLESS 3 INCH AND 6 INCH
REWINDING DIA.MAX 600MM(3 INCH REWIND),MAX 250MM( 1 INCH REWIND)
REWINDING WIDTHMINI 30MM
REWINDING CORE I.D3 INCH AIR SHAFT+1 INCH AIR SHAFT
SLITTING UNITRAZOR BLADE OPTIONAL: SHEAR BLADE
MECHANICAL SPEEDMAX450M/MIN
WORKING SPEEDMAX400M/MIN
MACHINE FRAME THICKNESS:40MM
METER COUNTER:METER COUNTER
WASTE EDGE UNIT:AIR BLOWER
POWER SOURCE380V,3 PHASE 4 WIRES,50Hz
PNEUMATIC SOURCE0.8MPA
LASER POSITIONING10 PCS
MACHINE SIZE (REF. ONLY):2950mm(not including unloading frame tree)×2550mm×1970mm
4190mm(including the unloading frame tree)×2550mm×1970mm
FLOOR SPACE(REF.ONLY):4200MM*3300MM
N.W/G.W (REF. ONLY):3000/3500

FUNCTIONAL DESCRIPITION

Rewinding:

 
1.
2 pcs 3 inch Normal Air Shafts+2 pcs 1 inch Normal Air Shafts
 
2.
By changing the rewinding shaft among 1 inch and 3 inch, this slitter can slit both 1 inch and 3 inch hot stamping and colding foil;
 
3.
Full width pressing rollers by air control to ensure the finished roll surface keep smooth;
 
4.
Manual laser core position units help to set paper/plastic cores easily and quickly, begin next slit run with very short downtime.
 
5.
Automatic tension control to ensure the rewinding tension stable.
 
 
 1 inch hot stamping foil slitting
 
 3 inch Hot Stamping Foil slitting
 

Blade Unit:

 
1.
Razor blade slit + Shear blade slit. Razor and Shear blade system changes by removing the razor blade shaft out and put on the up
 
2.
Razor blade setting easily setting by wrench losing and fixing, very quick and easy;
 
3.
Shear Blade system: up blade is using self-locking blade, it can easily move and fix by the screw; down blade setting by air shaft system, lose and fix the blade through the air deflating and filling, saves 50% time than the traditional way; ( Optional for Shear Blade System)
 
 Razor Blade System
 
 Air Shear Blade System (Optional)
 

Unloading:

 
1.
Manual finished roll unloading tree to help unload finished rolls conveniently;
 
 

Unwinding:

 
1.
Air Brake with load cell close loop system for unwind tension control
 
2.
3 inch and 6 inch shaftless uwinding system, easily change the jumbo roll;
 
3.
Hydraulic lifting system to help the operator loading the jumbo roll max. 1 ton from floor;(Optional)
 
4.
Material splice table, easy change and guarantee edge consistency
 
5.
EPC ultrasonic edge guider to avoid the influnce from shinning materia which reflect light back;
 
6.
Splice tabel to help operator make joint easily when change jumbo roll ;
 
 

Other points:

 
1.
Trim sytem: lower noise air blower to ensure the stability of blowe the trim material out;

GUARANTEE AND SERVICE

 
1.
100% Test and Check Before Shipment.
 
2.
Detailed Instruction Manual.
 
3.
One Year Guarantee for All Key Parts..
 
4.
Installing and Operator Training Service Provided.
 
5.
Whole-Life Free Technical Support.
 
6.
Regular On-Site Routine Inspection.