1: Manual finished roll unloading tree to help unload finished rolls conveniently;

1: Razor blade slit + Shear blade slit. Razor and Shear blade system changes by removing the razor blade shaft out and put on the up shear blade shaft. Down blade system do not need to change. 

2: Razor blade setting easily setting by wrench losing and fixing, very quick and easy;

3: Shear Blade system: up blade is using self-locking blade, it can easily move and fix by the screw; down blade setting by air shaft system, lose and fix the blade through the air deflating and filling, saves 50% time than the traditional way; ( Optional for Shear Blade System)

1:  Air Brake with load cell close loop system for unwind tension control  

2: 3 inch and 6 inch shaftless uwinding system, easily change the jumbo roll

3: Hydraulic lifting system to help the operator loading the jumbo roll max. 1 ton from floor;(Optional)

4: Material splice table, easy change and guarantee edge consistency

5: EPC ultrasonic edge guider to avoid the influnce from shinning materia which reflect light back

6: Splice tabel to help operator make joint easily when change jumbo roll

1: Trim sytem: lower noise air blower to ensure the stability of blowe the trim material out;