Daily Care Of Slitting Machine

Write By: administratorPublished In: ROOTCreated Date: 2019-10-15Hits:4821Comment:0

Check the main parts of the slitting machine and lubricate them before use.When inspecting and disassembling the slitting machine, improper tools and unscientific operation methods should be strictly prohibited.The machine should be thoroughly cleaned and inspected.

If not in use for a long time, all bright surfaces must be cleaned, coated with anti-rust oil and covered with plastic bags.If the slitting machine is out of use for more than 3 months, cover the anti-rust oil with moisture-proof paper;After completion of work, equipment should be carefully cleaned and exposed friction surfaces dried.

Daily maintenance

Do the daily maintenance of the cutting machine, should do the following five points.

Above all, should undertake to electric equipment part regularly clean check, eliminate hidden trouble in time.

Second, a high quality slitting machine knife should be used.

The third is to do a good job of cutting machine daily maintenance.The standard is: the sliding parts of the equipment should be smooth, clean, clean (dust, no debris), to ensure that the sliding parts of the equipment in good condition.

The fourth is to stop the periodic and irregular inspection of rotating parts (especially the real-time monitoring of wearing parts).Regular adjustment, regular replacement, commutator and fine recording to extend the service life of the equipment.

Fifth, in order to improve the technical quality and level of cutting machine operators, the control part of the operation should be carried out by specially-assigned personnel.No one shall operate without permission.

                            

More detail, please click:

 https://www.havesino.com/foil-slitter/Hot-Stamping-Foil-Slitter-Rewinder-HN800

Or contact our sales manager Alan.Liang , Email:[email protected]

 

Tags:Daily care of slitting machine

Same In Category

Leave A Comment

Captcha